PCI-E Riser Adapter Card Powered PCIe 1x to 16x riser

[USA - MD/DC/VA] [H] Various parts: GPUs, CPUs, RAM, Motherboards, Fans, PCIe Risers [W] Bitcoin, PayPal, Cash

All parts are in good working condition. Shipping is on top of listed prices. You can save money in shipping by buying more than 1 item.
All prices are flexible. I am open to reasonable negotiation.
GPUs
CPU/Motherboard/RAM
USB 3.0 PCIe Powered Risers
PCIe-to-PCIe risers (unpowered, 16x-to-16x)
Fans & cooling
submitted by Whiteboyfntastic1 to hardwareswap [link] [comments]

Wholesale 006C PCIe PCI-E PCI Express Riser Card 1x to 16x USB 3.0 Cable Adapter SATA to 4Pin IDE Molex 6 pin for Bitcoin Mining

hello,
we wholesale PCIe risers card for Miner Bitcoin ETH BTC. hope hear from you.
best regards, [email protected]
submitted by pcieriser to Bitcon [link] [comments]

[US-NC] [H] Gigabyte 7950, Sapphire 7970 GHz edition, Thermaltake and Antec 750w 80+ Gold PSU's, Intel 1155 CPU's, PCIe risers and adapters, display adapters, crossfire bridges (round 3!) [W] Bitcoin, Litecoin, PayPal, open to trades (mini itx mobo, PS4, etc)

I've got a lot of very well taken care of parts I'm now looking to sell. All parts are around 6 months old and I can provide the S/N to look up the warranty as well as pictures upon request. All prices are SHIPPED!
PARTS:
Please post any questions in this thread. PM me any offers, I'm open to bulk discounts and trades. All GPU's will be stress tested with FurMark prior to shipping
Thanks!
PICS
submitted by forwhat_itsworth to hardwareswap [link] [comments]

Can I use pcie risers and 16x? /r/Bitcoin

Can I use pcie risers and 16x? /Bitcoin submitted by BitcoinAllBot to BitcoinAll [link] [comments]

PCIE risers /r/Bitcoin

PCIE risers /Bitcoin submitted by BitcoinAllBot to BitcoinAll [link] [comments]

Powered PCIe Riser Cable 16x to 16x Extra Long with Molex is for sale on cryptothrift.com for Bitcoin and Litecoin https://cryptothrift.com/auctions/crypto-mining-accessories/powered-pcie-riser-cable-16x-to-16x-extra-long-with-molex/

Powered PCIe Riser Cable 16x to 16x Extra Long with Molex is for sale on cryptothrift.com for Bitcoin and Litecoin https://cryptothrift.com/auctions/crypto-mining-accessories/powered-pcie-riser-cable-16x-to-16x-extra-long-with-molex/ submitted by duetschpire to cryptothrift [link] [comments]

Powered PCIe Riser Cable 1x to 16x ExtraLong w/ molex is for sale on cryptothrift.com for Bitcoin and Litecoin https://cryptothrift.com/auctions/crypto-mining-accessories/powered-pcie-riser-cable-1x-to-16x-extralong-w-molex/

Powered PCIe Riser Cable 1x to 16x ExtraLong w/ molex is for sale on cryptothrift.com for Bitcoin and Litecoin https://cryptothrift.com/auctions/crypto-mining-accessories/powered-pcie-riser-cable-1x-to-16x-extralong-w-molex/ submitted by duetschpire to cryptothrift [link] [comments]

Powered PCIe Riser Cable 16x to 16x Standard Length with Molex is for sale on cryptothrift.com for Bitcoin and Litecoin https://cryptothrift.com/auctions/computer-cables/powered-pcie-riser-cable-16x-to-16x-standard-length-with-molex-2/

Powered PCIe Riser Cable 16x to 16x Standard Length with Molex is for sale on cryptothrift.com for Bitcoin and Litecoin https://cryptothrift.com/auctions/computer-cables/powered-pcie-riser-cable-16x-to-16x-standard-length-with-molex-2/ submitted by duetschpire to cryptothrift [link] [comments]

Powered PCIe Riser Cable 1x to 16x Standard Length with molex is for sale on cryptothrift.com for Bitcoin and Litecoin https://cryptothrift.com/auctions/crypto-mining-accessories/powered-pcie-riser-cable-1x-to-16x-standard-length-with-molex/

Powered PCIe Riser Cable 1x to 16x Standard Length with molex is for sale on cryptothrift.com for Bitcoin and Litecoin https://cryptothrift.com/auctions/crypto-mining-accessories/powered-pcie-riser-cable-1x-to-16x-standard-length-with-molex/ submitted by duetschpire to cryptothrift [link] [comments]

Lot of 2 Powered PCIe Riser Cable 1x to 16x w/ molex is for sale on cryptothrift.com for Bitcoin and Litecoin https://cryptothrift.com/auctions/crypto-mining-accessories/lot-of-2-powered-pcie-riser-cable-1x-to-16x-w-molex/

Lot of 2 Powered PCIe Riser Cable 1x to 16x w/ molex is for sale on cryptothrift.com for Bitcoin and Litecoin https://cryptothrift.com/auctions/crypto-mining-accessories/lot-of-2-powered-pcie-riser-cable-1x-to-16x-w-molex/ submitted by duetschpire to cryptothrift [link] [comments]

Powered PCIe Riser Cable 16x to 16x Standard Length with Molex is for sale on cryptothrift.com for Bitcoin and Litecoin https://cryptothrift.com/auctions/computer-cables/powered-pcie-riser-cable-16x-to-16x-standard-length-with-molex/

Powered PCIe Riser Cable 16x to 16x Standard Length with Molex is for sale on cryptothrift.com for Bitcoin and Litecoin https://cryptothrift.com/auctions/computer-cables/powered-pcie-riser-cable-16x-to-16x-standard-length-with-molex/ submitted by duetschpire to cryptothrift [link] [comments]

[USA-IL][H]Super Micro Server w/10x4TB WD Reds, 6U GPU mining chassis, Lian Li PC-06s case, EVGA Supernova 1600w PSU, some free stuff[W] PayPal, Local Cash

UPDATE: * i3 7100 gone * 2x 2700x box & cooler gone * EVGA Supernova 1600 G2 gone
ORIGINAL: Timestamps: https://imgur.com/a/KtaDdY6

Qty Item Price
1 Supermicro SC846 Dual Xeon e5-2650v3 Custom Server w/10x 4TB Reds, 24x drive sleds $800 OBO Local Cash
1 Lian Li PC-06S includes screws and rubber HDD mounts, etc etc. Made a minor mod to the case to fit AIO at the top. $100 + shipping/packaging, local preferred
1 0 EVGA Supernova 1600 G2 PayPal $200 shipped OBO
1 0 Pentium core i3-7100 w/cooler free + shipping
2 0 (cooler & box only) Ryzen 7 2700x free + shipping
1 6U GPU Bitcoin Mining Rig Server Case – w/6 Chassis fans w/dropdown backplate, 6x PCI-E 16x to 1x Risers & USB cables $100 + shipping/packaging, local preferred
1 Server in 10 bay Rosewill Chassis Local/Cash only
Supermicro SC846 Dual Xeon e5-2650v3 Custom Server
Everything is in Excellent Physical and Working Condition. Drives were powered on 24/7 from
Parts List Description
Supermicro SC846 Chassis (24 bay) Includes all 24 drive sleds
Supermicro PDB Upgraded Power distributor board for dual CPU
Supermicro 920w Super Quiet The regular PSU is too loud so upgraded
2x Intel Xeon e5-2650v3 Dual engineering samples 10c/20t each
2x Noctua NH-U9DXi4
4x 8GB Samsung DDR4-2133 REG ECC 32GB REG ECC Memory perfect for ZFS
3x LS 9211-8i Flashed to IT firmware
5x Noctua AF-A8 PWM Upgraded chassis fans to Noctuas
10 x WD 4TB Red (not shucked) Purchased 11-2014 from Newegg/Amazom
1x NvidiaGT 1030

EVGA Supernova 1600 G2
Standard cables:
Extra Cables:
submitted by november84 to hardwareswap [link] [comments]

esxi: PCIe risers and passthrough

Hi there,
I'm running esxi on my home server and I'm slowly coming to the conclusion that there are more discrete PCIe devices (low-power GPUs, USB-cards, SATA-controllers) that I'd like to pass through to individual VMs than my mainboard can provide PCIe slots for.
How would esxi handle PCIe bifurcation or riser systems like this? Could I pass through all PCIe devices connected to these kinds of systems to individual VMs or could I only pass through the "original" slot on the motherboard? To clarify, I'm not worried about bandwidth here since I'm neither using high-power GPUs nor 10Gbit ethernet adapters nor NVMe-storage, so I'd be fine with having 16 PCIe x1 slots instead of one PCIe x16 slot.
Thanks!
submitted by EspritFort to vmware [link] [comments]

Running Two GPUs- This is a tricky one.

Hello!
I'm trying to get a (remarkably unorthodox) multi-GPU setup working with my system. In short, I'm trying to pair an Nvidia GTX 1050ti and a Quadra FX580 on the same Windows 10 system. My motherboard is a Gigabyte GA-A320M-S2H.
The 1050ti is installed in the PCiE x16 slot, and the Quadro FX580 is installed in one of the PCiE 1x slots via a 1x -> 16x riser card(typically used by bitcoin miners). Windows 10 recognizes both devices in the device manager. Yes, I understand the bottlenecks, warnings, and otherwise ridiculous nature of this setup, but I just needs it for additional monitor outputs. Buying a completely new 10-series GPU or new motherboard is out of the budget(already had the Quadro FX580 on hand), and USB-based video cards are too unreliable and underperforming for what we're after. This is what we've tried so far and the results we've gotten:
Here's where things get interesting.
Booting into Linux, both GPUs work with no issues, right off the bat.
Booting into Windows 10 safe mode and running DDU (followed by a reboot back into safe mode) enables both GPUs, and they both work. Which suggests that Windows 10 is definitely capable of operating in this configuration. However, attempting to install either driver for either card (or even just letting Windows do so on its own) breaks the FX580 and enables only the 1050 ti, giving a "Code 43" for the FX580 in device manager.
I'm completely perplexed. Drivers for the FX580 aren't important, as it's just for additional screen real estate, though being able to run the latest drivers for the 1050ti would be nice for best game performance. Is there a way to "lock" the working Microsoft Basics Display Driver to the FX580, keeping it in a working state and allowing the 1050ti to be updated? My friend did this successfully with his personal system with a 1080ti and an old ATI card and it was plug-and-play; both cards worked great and there were no driver issues, so I'm completely stumped as to why this configuration is giving me so much trouble(He is stumped on this problem as well)
Any insight or help would be greatly appreciated!
submitted by tuckjohn37 to techsupport [link] [comments]

Help with my first deepfake

My gaming rig has a rtx 2080, a 4c/8t i7 and 16gb of ram, I want to make a ~15 second video however I need to be able to use my computer for school.
I also have a decommissioned bitcoin mining rig with 6 gtx 1070ti's, however it only has 4gb of ram and a crappy Pentium cpu.
My only other option is I could put two of the 1070ti's into my computer with some of my extra PCIE risers.
Which of these would be my best option? Would DeepFakeLab even run with 4gb of ram? Any help or advice is greatly appreciated!
submitted by The_Black_Python to SFWdeepfakes [link] [comments]

Computer Cases for 6+ GPUs?

Planning a new fan-cooled 3D rendering workstation. I liked Entagma's build, but its already outdated with the new AMDs coming out in November with 128 PCIe lanes (PCIE 4.0). So ideally, the build can have the option to expand beyond 4 gpus using riser cards to split x16 pci slots into 2 pci x8... potentially 6-10 gpu's.
Most cases can only handle 4 double-wide GPUs (rtx 2070). Are the bitcoin mining cases ok for 3D Rendering and fan cooling? I've seen a brand called Hydra III that looks promising. I don't want to buy a huge bulky rack just to use a rackmount style case. Or do you recommend another case?
https://www.amazon.com/Hydra-III-Server-Mining-Case/dp/B07B4PPQK8
submitted by freshairproject to Houdini [link] [comments]

SAS Expander in 5.25” form factor???

First time poster, long term lurkehoarder. I am currently running an unRAID server in a typical Rosewill server chassis, supplemented by second chassis that essentially just holds additional HDD’s that are connected over an HP SAS expander card coming off an LSI 8e external SAS card in the main server chassis very similar to the builds put together on the great site www.serverbuilds.net . I’m having a problem with not being able to power the HP SAS expander card reliably using any of the several of the PCIe power risers that others are using (type Bitcoin miners used to use). I have had to resort to installing and powering an additional spare motherboard/CPU in the disk chassis that I don’t need just to ensure that my HP SAS card is reliably powered. I was searching for solutions, and randomly came across this oddity of what appears to be a SAS expander implemented in a 5.25” external bay form factor:
https://www.pc-pitstop.com/arc-8028-24
This is much more expensive than I would want to spend (probably $40-60 range would be budget) and appears to have many higher end datacenter features that I don’t require, but appears to be a potential solution to my problem. If anyone knows of something in a similar form factor (or any other creative solutions to my PCI-e bus power problem) that can be had cheaply I would appreciate any suggestions or help.
In case it’s relevant, main unRAID chassis is a Rosewill RSV-L4500 and supplemental disk chassis is Rosewill RSV-L4000
submitted by yankeesteef3 to DataHoarder [link] [comments]

Weird issue with HP 24-Port SAS Expander and HP LSI SAS9200-8e

Hi guys,
I'm running a HP LSI SAS9200-8e SAS Controller (FW REV 20.00.06.00) in IT mode without a BIOS in my Server.
The controller is connected to two 24-port HP 487738-001 / 468406-B21 SAS-Expanders (FW REV 2.10) with a SFF-8087 to SFF-8088 cable each.
I upgraded the firmware from 2.08 to 2.10 using the procedure illustrated in this ServerFault post https://serverfault.com/a/631575 which worked fine (lsscsi and sas2ircu indicate firmware version 2.10 on the expanders)
The Expanders get their power from PCIe-Risers (those used by bitcoin miners), which works just fine.
Each of the expanders has two SFF-8087 to SATA breakout cables, each connected to a Chieftec CMR-3141SAS 4-bay disk enclosure.
Each enclosure contains three WDC WD60EFRX-68L 6TB WD-RED drives.
The drives are running in an MDADM RAID5
The drives an the expanders get their power from a separate 350W PSU.

Now for the issue.
When I turn on the expanders and drives, smartctl tells me the drives are only running 1.5 Gb/s. a speed test with hdparm confirms this. Turning on the expanders first and then plugging in the drives makes no difference.
running
sg_write_buffer --mode=activate_mc /dev/sg0 
fixes this (smartctl tells me this link is running with 3.0 Gb/s a speed test with hdparm confirms this) but degrades the array since the controllers are restarted and re-enumerate the drives.
I found this thread on the HardForum https://hardforum.com/threads/hp-sas-expander-only-negotiates-1-5gbps.1741898/

Maybe somebody here can help me or at least point me in the right direction.
submitted by Thunderbolt1993 to DataHoarder [link] [comments]

Need some troubleshooting help! Riser 008s and R3c

This project isn't for gpu mining but I know these risers are mainly used for this purpose so I thought I might get some good feedback here. My project is that I have an itx board with a single x16 pcie slot. It also has 3 m.2 pcie gen3 x4 slots. I have one free m.2 slot and wanted to convert that to x16 via riser. I wanted a 2nd low power silent gpu added to the rig. I went with the fanless msi 1030. It has a max draw of ~30w so I figured sata power would be safe. I purchased this and this to test with. Neither work!! So it must be something on my end?? The first part is fairly standard, the difference being I'm going to a m.2 slot where most of you are coming from x1 or x4. "In theory" this should just work! I'll start with the 2nd part since it's very simple: m.2 connector -> x16 socket + sata power. I hooked this up, seated the gpu and booted up. Nothing. Not even bios. I pulled the gpu and booted. Bios worked and booted up (running a 1080ti direct on the board). Installed the gpu back and nothing. I bought the 1030 used so I pulled the 1080ti and installed the 1030 direct to the mb. Works! So then I thought maybe the riser is bad or that sata power is insufficient seeing that most gpus would also have 6+8pin direct whereas mine has no external power. So I swapped risers out. This time the 008s with additional power connectors. Exact same thing. First I powered via pci only. Then sata+pci. And finally sata+pci+molex. In all situations the red led lit up. In all situations if I do not have the gpu plugged in it boots up fine. The strange thing is I never get into bios. No speaker or post lcd on this board so my troubleshooting is limited. And to note I test both gpu hdmi ports just to make sure one vs the other was set to primary. I got lazy and just looked at my mouse to light up to see if it booted. The mouse stayed dark, implying it never posted. Any help would be greatly appreciated! solved I have two m.2. ports which are pcie only. I have 1 port that is pcie/sata. the suggestion by u/sqrtlurface was to use the pcie/sata port and now the 1030 is being recognized in both linux and windows.
submitted by iguanajm to gpumining [link] [comments]

A story from a cloaky camper and an attempt to build a beast mode multi-boxing server.

21/04/2018
Hello Nerds!
 
Some of you may know me, some may not. Those that do will know I offer cloaky camping services over new eden. I do camping contracts / extort renters and focus my time hunting botters when the contracts are quiet. I offer PvP entities access to my cyno network to get dank kills and big escalations. From super carriers to Rattlesnakes.
 
The thing that got me into camping was hunting bots back in the dronelands a few years ago. I realised the most effective way to hurt them was to camp them 23/7, follow them around using locator agents. Eventually they had to rat with me in system. When they did I setup bubble traps etc and dropped blops and cleaned them up.
 
The 2nd thing I love about cloaky camping is the ability to counter Alliances (i feel its overpowered) intel channels / networks. Think about it. They have multiple intel toons dotted around the entrances to their pipes reporting hunters coming into the pipe allowing the PvE players to warp off and safe up. They even use external programs to collect this intel and give audible alerts. Cloaky camping is just the polar opposite. Dotting toons in their ratting pocket and giving me intel on whats going on in their system. As long as local chat exists so will cloaky camping. I'm pretty confident CCP share the same thought.
 
People probably think cloaky camping is easy. You are wrong. The prep work and behind the scenes work that goes into it is pretty immense. You are about to find out.
 
The hardware i'm currently running the 60 clients on is as follows:
 
Camper1: Screenshot of 30 Clients Layout
Camper2:
 
How do you pay for 60 toons
I started with 10 campers and made ISK by other means. When I made new campers I invested ISK and started to Skill extract and plexing the toons. I also make a decent amount from people who pay me to camp others.
 
The Setup  
I manage the clients window positions and CPU allocation with ISBOXER. Its legal to use as long as you don't use input broadcasting. I boot up the clients with ISBOXER EVE Launcher. I copy the window positions / chat channels etc over using garpaui. I use remote desktop to manage the clients light cynos etc.
Example here
 
On both motherboards I had to under clock the processors as they were drawing too much power from the motherboard and causing the chipset to overheat. I think these motherboards are not beefy enough to support these 8 core processors. It caused the CPU to throttle reducing the clock speeds to 1.3Ghz and causing lag issues. I solved this problem by reducing the clock speed from 4Ghz to 3.6Ghz and reducing the CPU voltage. This reduced the heat by a really good amount and stopped the problems.
 
However, Me being me I wanted to expand and the camping pcs were running at full chat. So I needed a better piece of hardware to host these 60+ clients. So, while at Fanfest, I bidded on this R820 Server on ebay and won!
 
Specs:
 
The hardware should be able to support multiple clients. However i'm not too sure how eve is going to behave when I try and open 60 instances all in one OS. I have set myself up for a hell of a challenge! However, I feel like I got a pretty good deal on the server and DELL hold their value. I'm sure I can re sell it if the project fails.
 
Things to work out:
 
Things I will teach you guys
 
I'm learning too so your help input would be awesome! First question. Shall I just update this reddit post each time or create some sort of blog?
Old AMD FX Rigs
New Kit / with various bits I gathered to get started
 
Update 23/04/18
I have made some decent progress on this crazy project. I will give some breif updates here. I will get a blog up and running to post full details with how to's etc. Its probably way to long for reddit.
 
I have successfully installed some GPU's into the R810 AMD R9 280x and Nvidia GTX 970. I soldered some PCI-E cables to the PDB and it worked fine. The GTX sits nicely in the chassis however, the R9 280X is external atm using a PCIE x1 to x16 riser (from my bitcoin mining). Also I have managed to enable and use them both with passthrough in ESXI 6.5. Yes the GPU works with a x1 adaptor. WTF!
 
Freezing Problem with a single os install
If I try and run more than 40 clients in a single OS I the system freezes when loading up client 41. I have tried the following:
I cannot see why it is freezing. Is there any way to gather logs for the client? It doesn't appear to be a resource problem. Plenty of RAM / CPU and HDD isn't going crazy.
 
Here are some pics of the current progress:
submitted by Mar5hy to Eve [link] [comments]

Anyone have any experience with m.2 to x16 risers?

So first off, I'm a little disappointed that there aren't any april fools jokes here.....I have just come from homelab and well the top 15 posts are pictures of labs (the dog). perhaps a little excessive. lol.
I'm getting into virtualization (I'm testing clear linux + kvm) and have bought parts to add a second gpu to my itx build. itx builds for the most part only come with a single x16 slot. That is occupied by a 1080ti. This will be for passthru use. So from my learning it would be beneficial for me to have a 2nd gpu. The only expansion I have now is m.2. They are pcie gen 3 x4 based slots. Technically I should be able to convert to a x16 sized slot but run at x4 speed. For my use (2d only) this should be fine. Talking about this is making me research my card being compatible with x4. I believe all x16 cards are backwards compatible by design, but double checking. I am testing this and this so far without success. This application is primarily used in the crypto mining world so I asked for troubleshooting help there but was curious if any attempts here were made. p.s. my build is skylake-x which disappointingly doesn't come with igp and that would have solved my 2nd gpu issue. any itx owners with no igpu or need a 2nd/3rd gpu can try buying the above parts, but make sure you have a sata/pcie m.2 slot. for my system m.2 pcie only did NOT work properly.
submitted by iguanajm to virtualization [link] [comments]

[USA-CO][H]ram, lga 2011 gear, 256 thread cpus/systems, gpus (firepros), 3647 gear, cpus, servers, ssds[W]specific items, cash, paypal, crypto

__


"**well I got some stuff to sell, shipping included unless local only (80023 broomfield co, or 81501 Grand Junction), prices obo but I may not budge much depending on the item. Crypto preferred. Minimum order $50 (I may lower if im not too busy).**

_


-----wanted-----

audio gear (high end speakers/amps)

new gpu (1080 or above)

paypal

local cash

bitcoin, ether, zcash, other cryptos

Timestamps/Pics- https://imgur.com/a/Xoc01TO

MINING GPUS |Description|Price
:--|:--|:--
AMD SKY 900|NEW they do just under 550h/s on zcash and ~1000h/s on monero|$200 (small quantities available)
AMD SKY 700|NEW. A sky 700 will do 280h/s on zcash and 500h/s on monero|$110 (medium quantities available)
AMD W7000|used and mined on |$100 (medium quantities available)
s9150|used and mined on |$250 (5 available)

_

DDR3 ram |Description|Price
:--|:--|:--
4gb 1600mhz ddr3 non-ecc for desktop|ad3u1600w4g11-b|$15 each 4 sticks available
4gb 1600mhz ddr3 non-ecc for laptop|5M30G75129|$15 1 stick avalible
4gb 1600mhz ddr3 non-ecc for desktop|CMX8GX3M2A1333C9|$15 2 stick avalible

_


INTEL PHI GEAR |Description|Price
:--|:--|:--
intel s7200ap motherboard | Proprietary board and wiring |$550
intel Compute Module HNS7200AP (no fans) | works with intel h2000g chassis |$599
very barebone h2000g chassis and 4 compute moduals | VERY BAREBONE |$1800
Earily es Intel phi | 64 cores, 256 threads, and 8gb of mcdram, thats half of what the production chips have. This chip isnt fantastic for mining |$400 (2 available)
complete running server with 4 cpus| 256 cores, 1024 threads, 48gb mcdram, dual 2100w psu (2 es 8gb chips and 2 es 16gb chips) |$3800 + shipping
~

Faqs about these systems


~

Q: ddr4 is expensive what do I do!
A: good news! you can run the cache on the cpus in flat mode and you do longer need ram. this is not a joke my server
running right now has empty dimms.

Q: why the excitement?
A: the intel s7200ap is the only motherboard available outside of a prebuild system for the x200 intel phis

Q: I hate computers but like these what should I do
A: Buy a full h2000g chassis and 4 compute modules. it will be plug and play.

Q: but does windows like them?
A: in typical windows fashion of hating everything that is cool, not so much. I got it to work in windows when I disabled
hyperthreading and im still testing. linux worked flawlessly. Edit: if you disable 4 cores they will work with hperthreading
enabled

Q: how do I control my raging boner?
A: Embrace it and if it doesn't die down in 4 hours consult a doctor.

Q: WHY DO I NEED THIS!
A: It can mine :P (2700h/s on monero on only 200w)


Q: how do I give you monies
A: I take anything of value including crypto, cash, the corpse of a x99 rig your parting with as a result of this intel bug, ect...

~



_


Items|Description|Price
:--|:--|:--
Opteron 6234|12 core, decent for monero or cryptonight|$25 (3 available)
supermicro x11dpl-i|dual lga 3647| $380
Fusion IO 640GB IODRIVE |pcie ssd| $140
Seagate Constellation ES 2tb sas drive|ST32000444SS|$40
W3680| 6 core @ 3.3ghz| $60
unknown lga 3647 cpu| 1.5ghz looks like a gold or platinum series chip| $150 (2 available)
Emu 1212M PCI 24-Bit/192kHz Balanced Interface | Mastering-grade 24-bit, 192kHz converters.Multi-effects Processor.|$15
EMC 200GB ENTERPRISE 2.5"" SSD HUSSL4020ASS600|Decent enterprise ssd's|$60 (2 available)
I7 960|Socket 1366|$40
AMCC 9650SE-12ML |sata raid controler | $10
Jetway PICO NP93-2930r pico itx pc|http://www.jetwaycomputer.com/NP93.html|$110
Intel 80+ platinum 2130w psu (no fans included)|FXX2130PCRPS| $50 (quantity available)
2011 combo 1 |24gb ddr3 ecc, evga sr-x mobo (has some small issues), dual e5-2670's| $420
2011 combo 2 |24gb ddr3 ecc, intel mobo , dual e5-2650's | $380
2011 combo 3 |24gb ddr3 ecc, supermicro mobo , dual e5-2650's | $400
24a apc pdu|typical 220v dryer connection on the end|$50\
pcie risers|powered, molex|$5 (15+ available)
_

**LOCAL ONLY** (unless buyer pays shipping)

_

LOCAL ONLY|Description|Price
:--|:--|:--
Custom built server|Dual e5-2670, intel mobo, 16tb of hdd, 640gb of ssd, 60gb of ram|$2200
Corsair h100 AIO|fairly old by now|$40
mining rig 1|4x amd sky 900, dual opteron|$2000
mining rig 2|4 w7000, 1 sky 900, cheap cpus|$1100
mining rig 3|5 s9150, dual e5-2650|$1500
mining rig 4|5 s9000, cheap cpus|$1200
boxes|mostly consumer gpus from abit ago|$5

_

As-is hardware|No returns for any reason on as-is hardware. I will only accept non refundable payment for these items ie. bitcoin, paypal f&f, or local cash|Price
:--|:--|:--
R9 290|Worked for abit, looks like cap fell off|$45
ASUS P6t v2 deluxe|Killed it with my direct di water cooling setup. 95% chance its dead|$20
s10000|most likely dead|$100
cat s60 phone|the bottom circuit board needs to be replaced currently it all works except the cell service and aux|$100

"

submitted by cdabc123 to hardwareswap [link] [comments]

Next-Gen PCI-e Flat Risers for Mining USB Powered Risers GPU mining Litecoin Bitcoin Which Crypto Mining PCIE Risers Do YOU Prefer? GPU Mining PCI RISER Common Problems How To & Why Use PCI-E 1X - 16X USB Extension Riser Cables

Posts Tagged ‘pcie-risers This is a blog for crypto currency miners and crypto coin users of Bitcoin (BTC), Litecoin (LTC), Ethereum (ETH), ZCash (ZEC) and many other altcoins out there. GPU\PCIe Risers . The best GPU Risers today come a bit more feature-rich than the original ones we used a few years ago. Make sure to buy a few extras if you do decide on purchasing the less expensive set. To us, if you can afford to spare a few extra dollars on the premium GPU, Risers is well worth it in the long run. PCIe risers to require some extra power connections from the power supply (or motherboard if you purchased a mining motherboard such as the Biostar TB250-BTC), so make sure you plan accordingly and get a modular power supply for your mining rig. My favorite risers are the Victony PCIe risers. They seem to be very reliable and just work. When using risers and trying to run full PCIe 3.0 speeds, you NEED a quality cable (either USB Ribbon) as the shielding is very important to maintain the signal integrity. many people who are using the USB cables as riser for mining can get away with rather low end cables because they run the PCIe lanes at reduced speeds most of the time Those risers have a completely different purpose from the conventional riser. This review focuses on gaming risers, but we will test Bitcoin risers as well, to give you some idea what kind of performance difference are we looking at. PCIe extender types. The words extender and riser are often used interchangeably.

[index] [8924] [3438] [10270] [6926] [7750] [7776] [7999] [9604] [12957] [4061]

Next-Gen PCI-e Flat Risers for Mining

Testing the new 4-port PCIE multiplier card with riser cable boards for Ethereum GPU mining. This card allows connecting 4 GPUs to a single x1 PCIE slot. ... Bitcoin and Altcoins 90,264 views. Tips for using PCIe Powered Risers - Duration: 7:30. Bitcoin and Altcoins 90,468 views. 7:30. Language: English Location: United States Restricted Mode: Off History Help About ... Tips for using PCIe Powered Risers - Duration: 7:30. Bitcoin and Altcoins 90,417 views. 7:30. NEW RISER PCI-E X1 TO PCI-E X16 รีวิว - Duration: 6:16. thanavi looktao 3,614 views. Best and worst PCIE risers for mining rig - Duration: 5:21. DevilsBitcoins 2,158 views. 5:21. ... Bitcoin and Altcoins 90,417 views. 7:30. Vertical GPU Brackets - Why NOT To Use Them! Need PCIE Mining Risers? https://geni.us/t8BR Match Those Risers with this GPU? https://geni.us/wwYNKF Red Panda Mining NEW Merch! ... BUY BITCOIN WHILE PRICE STUCK IN LIMBO, WATCH FIAT BURN!! Big ...